Plumbing Fittings

Brass Compression Coupling — Standard & Lead-Free

Full-range straight compression couplings in C36000 standard and C27450 lead-free brass. NSF 61 & NSF 372 certified. 1/8" to 2" NPT/BSPT.

Sizes 1/8" – 2"

MOQ 500 pcs per size/…

LF-PL-PX

PEX Brass Insert Fittings — Crimp & Clamp Style

Lead-free C27450 brass PEX fittings for crimp-ring (ASTM F1807) and clamp/cinch (ASTM F2098) systems. 3/8" to 1" OD. NSF 61, ASSE 1061…

Sizes 3/8" – 1" OD PEX

MOQ 500 pcs per size/…

Sizes 1/8" through 4" NPT/B…

LF-PL-FP

Forged

Forged Brass Pipe Fittings — Full Range

C37700 forged brass — 90° elbows, 45° elbows, tees, couplings, unions, caps, bushings. 1/8" to 4" NPT/BSPT. ASME B16.15 compliant.

MOQ 200–500 pcs

LF-PL-BV

FULL PORT

Brass Ball Valves — Full Port (1/4" to 3")

Forged brass full-port ball valves with chrome-plated brass ball and PTFE seats. 1/4" to 3" NPT. 600 WOG, 150 WSP. Water, gas,…

Sizes 1/4" – 3"

MOQ 200 pcs per size

LF-PL-AS

Sizes 1/2" IPS Fema… – 1/2" Sweat ×…

Brass Angle Stop Valves — Quarter-Turn

Quarter-turn angle stop supply valves for under-sink and toilet supply. 1/2" comp × 3/8" or 1/2" OD outlet. C37700 forged body. NSF…

MOQ 1

LF-PL-PC

Push-to-Connect Fittings — Brass Body

Lead-free brass push-to-connect fittings, SharkBite-compatible. 1/4" to 1" OD. For PEX, copper, CPVC, PE-RT. NSF 61 certified.

Sizes 1/4" – 1" OD

MOQ 500 pcs per size

Fitting Types in This Category

Reference library for the fitting types we supply in this category. Click any card to learn about its design, common applications, and typical materials.

Angle Stop Valve

Compact quarter-turn or multi-turn valve at fixture supply points — combines a shutoff valve with a 90° direction change in one fitting.

Brass Ball Valve

Quarter-turn shutoff valve with a rotating ported brass ball — fully open or fully closed with a 90° handle turn.

Brass Compression Coupling

Gasket-free brass fitting that seals two pipe ends using a compression nut and ferrule — no soldering or threading required.

Brass Pipe Coupling & Union

Threaded brass fittings for joining two pipe ends in a straight run — couplings for permanent joints, unions for disconnectable service.

Brass Pipe Elbow (90° and 45°)

Threaded brass fitting that changes pipe direction by 90° or 45° — available in forged or cast styles for water, gas, and air service.

Brass Pipe Nipple & Adapter

Short threaded brass connectors that bridge between fittings or transition between thread types (NPT to BSP, male to female, etc.).

Brass Pipe Tee (Equal and Reducing)

Three-way threaded brass fitting that creates a branch off a main pipe run — available in equal-size and reducing configurations.

Forged Brass Pipe Fitting

Pressure-rated threaded brass fitting made by hot-forging rather than casting — higher strength, finer grain structure, better for industrial service.

Hose Barb Fitting

Brass fitting with a ridged barb that fits inside a flexible hose, secured by a hose clamp — for hose-to-pipe transitions.

PEX Brass Insert Fitting

Lead-free brass fitting that connects PEX tubing to threaded plumbing — works with crimp-ring and clamp/cinch installation methods.

Push-to-Connect Brass Fitting

Tool-less brass fitting that grips and seals pipe with internal teeth and O-ring — pushes on by hand, releases with a release ring.